Annapolis Makerspace

Back

CAD/CAM and CNC with Autodesk Fusion 360

Start
Tuesday, February 19, 2019
End
Tuesday, December 19, 2028
Schedule
119 sessions
#1.
Tuesday, February 19, 2019, 7:00 PM 9:30 PM
#2.
Tuesday, March 19, 2019, 7:00 PM 9:30 PM
#3.
Tuesday, April 16, 2019, 7:00 PM 9:30 PM
#4.
Tuesday, May 21, 2019, 7:00 PM 9:30 PM
#5.
Tuesday, June 18, 2019, 7:00 PM 9:30 PM
#6.
Tuesday, July 16, 2019, 7:00 PM 9:30 PM
#7.
Tuesday, August 20, 2019, 7:00 PM 9:30 PM
#8.
Tuesday, September 17, 2019, 7:00 PM 9:30 PM
#9.
Tuesday, October 15, 2019, 7:00 PM 9:30 PM
#10.
Tuesday, November 19, 2019, 7:00 PM 9:30 PM
#11.
Tuesday, December 17, 2019, 7:00 PM 9:30 PM
#12.
Tuesday, January 21, 2020, 7:00 PM 9:30 PM
#13.
Tuesday, February 18, 2020, 7:00 PM 9:30 PM
#14.
Tuesday, March 17, 2020, 7:00 PM 9:30 PM
#15.
Tuesday, April 21, 2020, 7:00 PM 9:30 PM
#16.
Tuesday, May 19, 2020, 7:00 PM 9:30 PM
#17.
Tuesday, June 16, 2020, 7:00 PM 9:30 PM
#18.
Tuesday, July 21, 2020, 7:00 PM 9:30 PM
#19.
Tuesday, August 18, 2020, 7:00 PM 9:30 PM
#20.
Tuesday, September 15, 2020, 7:00 PM 9:30 PM
#21.
Tuesday, October 20, 2020, 7:00 PM 9:30 PM
#22.
Tuesday, November 17, 2020, 7:00 PM 9:30 PM
#23.
Tuesday, December 15, 2020, 7:00 PM 9:30 PM
#24.
Tuesday, January 19, 2021, 7:00 PM 9:30 PM
#25.
Tuesday, February 16, 2021, 7:00 PM 9:30 PM
#26.
Tuesday, March 16, 2021, 7:00 PM 9:30 PM
#27.
Tuesday, April 20, 2021, 7:00 PM 9:30 PM
#28.
Tuesday, May 18, 2021, 7:00 PM 9:30 PM
#29.
Tuesday, June 15, 2021, 7:00 PM 9:30 PM
#30.
Tuesday, July 20, 2021, 7:00 PM 9:30 PM
#31.
Tuesday, August 17, 2021, 7:00 PM 9:30 PM
#32.
Tuesday, September 21, 2021, 7:00 PM 9:30 PM
#33.
Tuesday, October 19, 2021, 7:00 PM 9:30 PM
#34.
Tuesday, November 16, 2021, 7:00 PM 9:30 PM
#35.
Tuesday, December 21, 2021, 7:00 PM 9:30 PM
#36.
Tuesday, January 18, 2022, 7:00 PM 9:30 PM
#37.
Tuesday, February 15, 2022, 7:00 PM 9:30 PM
#38.
Tuesday, March 15, 2022, 7:00 PM 9:30 PM
#39.
Tuesday, April 19, 2022, 7:00 PM 9:30 PM
#40.
Tuesday, May 17, 2022, 7:00 PM 9:30 PM
#41.
Tuesday, June 21, 2022, 7:00 PM 9:30 PM
#42.
Tuesday, July 19, 2022, 7:00 PM 9:30 PM
#43.
Tuesday, August 16, 2022, 7:00 PM 9:30 PM
#44.
Tuesday, September 20, 2022, 7:00 PM 9:30 PM
#45.
Tuesday, October 18, 2022, 7:00 PM 9:30 PM
#46.
Tuesday, November 15, 2022, 7:00 PM 9:30 PM
#47.
Tuesday, December 20, 2022, 7:00 PM 9:30 PM
#48.
Tuesday, January 17, 2023, 7:00 PM 9:30 PM
#49.
Tuesday, February 21, 2023, 7:00 PM 9:30 PM
#50.
Tuesday, March 21, 2023, 7:00 PM 9:30 PM
#51.
Tuesday, April 18, 2023, 7:00 PM 9:30 PM
#52.
Tuesday, May 16, 2023, 7:00 PM 9:30 PM
#53.
Tuesday, June 20, 2023, 7:00 PM 9:30 PM
#54.
Tuesday, July 18, 2023, 7:00 PM 9:30 PM
#55.
Tuesday, August 15, 2023, 7:00 PM 9:30 PM
#56.
Tuesday, September 19, 2023, 7:00 PM 9:30 PM
#57.
Tuesday, October 17, 2023, 7:00 PM 9:30 PM
#58.
Tuesday, November 21, 2023, 7:00 PM 9:30 PM
#59.
Tuesday, December 19, 2023, 7:00 PM 9:30 PM
#60.
Tuesday, January 16, 2024, 7:00 PM 9:30 PM
#61.
Tuesday, February 20, 2024, 7:00 PM 9:30 PM
#62.
Tuesday, March 19, 2024, 7:00 PM 9:30 PM
#63.
Tuesday, April 16, 2024, 7:00 PM 9:30 PM
#64.
Tuesday, May 21, 2024, 7:00 PM 9:30 PM
#65.
Tuesday, June 18, 2024, 7:00 PM 9:30 PM
#66.
Tuesday, July 16, 2024, 7:00 PM 9:30 PM
#67.
Tuesday, August 20, 2024, 7:00 PM 9:30 PM
#68.
Tuesday, September 17, 2024, 7:00 PM 9:30 PM
#69.
Tuesday, October 15, 2024, 7:00 PM 9:30 PM
#70.
Tuesday, November 19, 2024, 7:00 PM 9:30 PM
#71.
Tuesday, December 17, 2024, 7:00 PM 9:30 PM
#72.
Tuesday, January 21, 2025, 7:00 PM 9:30 PM
#73.
Tuesday, February 18, 2025, 7:00 PM 9:30 PM
#74.
Tuesday, March 18, 2025, 7:00 PM 9:30 PM
#75.
Tuesday, April 15, 2025, 7:00 PM 9:30 PM
#76.
Tuesday, May 20, 2025, 7:00 PM 9:30 PM
#77.
Tuesday, June 17, 2025, 7:00 PM 9:30 PM
#78.
Tuesday, July 15, 2025, 7:00 PM 9:30 PM
#79.
Tuesday, August 19, 2025, 7:00 PM 9:30 PM
#80.
Tuesday, September 16, 2025, 7:00 PM 9:30 PM
#81.
Tuesday, October 21, 2025, 7:00 PM 9:30 PM
#82.
Tuesday, November 18, 2025, 7:00 PM 9:30 PM
#83.
Tuesday, December 16, 2025, 7:00 PM 9:30 PM
#84.
Tuesday, January 20, 2026, 7:00 PM 9:30 PM
#85.
Tuesday, February 17, 2026, 7:00 PM 9:30 PM
#86.
Tuesday, March 17, 2026, 7:00 PM 9:30 PM
#87.
Tuesday, April 21, 2026, 7:00 PM 9:30 PM
#88.
Tuesday, May 19, 2026, 7:00 PM 9:30 PM
#89.
Tuesday, June 16, 2026, 7:00 PM 9:30 PM
#90.
Tuesday, July 21, 2026, 7:00 PM 9:30 PM
#91.
Tuesday, August 18, 2026, 7:00 PM 9:30 PM
#92.
Tuesday, September 15, 2026, 7:00 PM 9:30 PM
#93.
Tuesday, October 20, 2026, 7:00 PM 9:30 PM
#94.
Tuesday, November 17, 2026, 7:00 PM 9:30 PM
#95.
Tuesday, December 15, 2026, 7:00 PM 9:30 PM
#96.
Tuesday, January 19, 2027, 7:00 PM 9:30 PM
#97.
Tuesday, February 16, 2027, 7:00 PM 9:30 PM
#98.
Tuesday, March 16, 2027, 7:00 PM 9:30 PM
#99.
Tuesday, April 20, 2027, 7:00 PM 9:30 PM
#100.
Tuesday, May 18, 2027, 7:00 PM 9:30 PM
#101.
Tuesday, June 15, 2027, 7:00 PM 9:30 PM
#102.
Tuesday, July 20, 2027, 7:00 PM 9:30 PM
#103.
Tuesday, August 17, 2027, 7:00 PM 9:30 PM
#104.
Tuesday, September 21, 2027, 7:00 PM 9:30 PM
#105.
Tuesday, October 19, 2027, 7:00 PM 9:30 PM
#106.
Tuesday, November 16, 2027, 7:00 PM 9:30 PM
#107.
Tuesday, December 21, 2027, 7:00 PM 9:30 PM
#108.
Tuesday, January 18, 2028, 7:00 PM 9:30 PM
#109.
Tuesday, February 15, 2028, 7:00 PM 9:30 PM
#110.
Tuesday, March 21, 2028, 7:00 PM 9:30 PM
#111.
Tuesday, April 18, 2028, 7:00 PM 9:30 PM
#112.
Tuesday, May 16, 2028, 7:00 PM 9:30 PM
#113.
Tuesday, June 20, 2028, 7:00 PM 9:30 PM
#114.
Tuesday, July 18, 2028, 7:00 PM 9:30 PM
#115.
Tuesday, August 15, 2028, 7:00 PM 9:30 PM
#116.
Tuesday, September 19, 2028, 7:00 PM 9:30 PM
#117.
Tuesday, October 17, 2028, 7:00 PM 9:30 PM
#118.
Tuesday, November 21, 2028, 7:00 PM 9:30 PM
#119.
Tuesday, December 19, 2028, 7:00 PM 9:30 PM
Location
Annapolis Makerspace, 2014 Renard Ct, Unit C, Annapolis, MD 21401

So you can do 3D design, but you want to do something practical with it like mill your design on a CNC router. This companion workshop, to our Autodesk Fusion 360 workshop on the first Tuesday of every month, will help you with the next step in the CAD/CAM process.

Topics can include CAM programming, setting up work on the router, router maintenance and improvements.

General Meetings:
4th Tuesday of each month @ 7:00 pm

Meeting Info

Contact info

trevor@makeannapolis.org